VECTOR HTG is a synthetic formulation developed to optimize removal rate and surface finish in grinding, sawing, and dicing processes using diamond grinding wheels and blades. The product’s exceptional heat transfer characteristics insure prolonged diamond life. VECTOR HTG is compatible with all filtration systems, and its foam-free operation promotes operator acceptance.
Directions
VECTOR HTG is designed for use at economical dilution ratios and is equally effective in hard and soft water. For optimum results in “once-through” coolant feed systems, follow the dilution ratios listed below, making production specific adjustments as needed:
| Application | Dilution Ratio |
|---|---|
| Back-Grinding | 75:1 |
| Surface/Blanchard | 50:1 |
| O.D./Cylindrical | 100:1 |
| Edge/Bevel/Dicing | 100:1 |
| As Corrosion Inhibitor for Free Abrasive Lapping | 50:1 |
Maintaining dilution ratios with a hand-held refractometer is recommended. A pH meter is also useful. Develop production-specific scales by obtaining accurately measured samples of a properly diluted mixture that corresponds to use. Maintain a higher concentration for recirculating, filtered coolant systems.
Grinding, Backgrinding, and Cropping
- Formulated for high lubricity and thermal dissipation
- Extend wheel life and prevent surface burning or microfractures
- Clean-rinsing and low-residue for wafer thinning and surface prep
Certifications
